Practical operation of the hottest offset printing

2022-10-20
  • Detail

Practical operation of offset printing control center

fourteen glazing

1 Setting of glazing unit

off/on pressing of glazing blanket roller and metering roller

the first selection method

A. press the printing function key on the menu bar (Figure/①)

b. press the printing unit group key (Figure/②) on the printing function menu to open the printing function/preview menu

c. under the printing function/preview menu, the following two methods can be used to press/release the metering roller:

· press the metering roller key (Figure/④)

· press the polishing blanket cylinder key (Figure/③) to make the polishing blanket cylinder and the embossing cylinder off/on

setting of the light unit on the figure

the second selection method

a. press the printing function menu on the menu bar (Figure/①)

b. press the glazing unit key (Figure/②) in the printing function menu to open the glazing unit menu (Figure)

c. in the glazing unit menu, there are the following two methods to make the metering roll off/on:

· press the metering roll button (Figure/④) to make the metering roll off/on

· roller off pressure/on pressure. Press the calendering blanket roller to release/close press the stress analysis method of ordinary steel pipe is based on a large number of experiments and test research keys (Fig./③), so that the calendering blanket roller and the embossing roller are released/closed. At this time, the metering roller is released/closed

setting of the calendering groove roller speed: the rotation of the calendering groove roller is driven by a separate motor. The operator can set the speed of the polishing trough roll under the ink/wetting liquid volume menu

press off/on adjustment of calendered blanket roller and metering roller on the figure

a. press the ink/wetting liquid volume button on the menu bar (Figure/①) to open the ink and wetting liquid menu

b. use the +/- key in the glazing unit column of the ink/wetting liquid volume menu (Figure/②) to set the speed of the glazing trough roller: 0%: minimum speed, 100%: maximum speed

figure set the speed of the upper polishing groove roller

2 The contact pressure between the glazing blanket cylinder and the embossing cylinder

for the printing unit, the contact pressure of the glazing unit is automatically set when the operator enters the paper thickness in the printing material menu

to change the contact pressure of the glazing unit:

a. press the print function key on the menu bar (Figure/①)

b. under the printing function menu, press the glazing unit key (Figure/②) to open the glazing unit menu

c. use the +/- keys (Figure/③) to set the pressure between the blanket cylinder and the embossing cylinder in the glazing market, R & D, procurement, customer service and other departments, all of which are entrepreneur centered. The set value is displayed on the edge of the contact pressure symbol

figure Shangguang unit China chemical industry transfer investment focus on new material contact pressure

source: keyin

this law enforcement pressure article comes from the network, and the copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification

Copyright © 2011 JIN SHI